Digital Oscilloscope

About Digital Oscilloscope

Specifications 

Bandwidth: DC-100MHz

Channels: 2

Bandwidth Limits: 20MHz (-3dB)

Sample Rate: 1GS/s

Sample Mode: Real Time

Sample Memory Dept: 40 K

Time base range: 4ns/div80s/div

Time base accuracy: 50ppm

Display Type: 7 inch LCD color (800X 480 pixels)

Display Language: English Input

Mode: Sample, peak detect, averaging

Input coupling: DC, AC, GND,

Input impedance: 1M 2% in parallel with 20pF 3pF

Probe attenuation factors: 1X, 10X, 100X,1000X

Maximum input voltage: 300 VRMS (420V pk-pk CATI & CAT II) Vertical

Vertical resolution: 8 bits

Vertical sensitivity to BNC): 2mV/div5V/div (input

Rising time (typical on BNC): 3.5nS

Accuracy: 3%

Trigger

Trigger Source: Ch1, CH2, Line, External

Trigger Modes Edge: Auto, Normal, Single,

Trigger Coupling Reject: AC, DC, LF Reject, HF

Trigger Sensitivity: DC to 100MHz: 200mV

Trigger Level Range:CH1,CH2: 8 Division from Center of Screen

Interface

USB

Measurement system

Automatic measurement

Frequency, Period, Mean, Pk-Pk, Cyclic RMS, Minimum, Maximum, Rise Time, Fall Time, +Pulse width, -Pulse width, Delay 1-2 Rise, Delay 1-2 Rise, Delay 1-2 Fall, +Duty,-Duty, Vbase, Vtop,Vmid,Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR,LRR,LRF,LFR,LFF

Waveform math: +,-, X,

Waveform storage 10 setups: 10 waveform,

Lissajou's figure: Available

FFT window hamming, blackman, rectangle : Hanning,

FFT acquisition points : 1024 points

Power Supply

AC230V, 50Hz