10MHz Function/Arbitrary Waveform Generator

About 10MHz Function/Arbitrary Waveform Generator

Technical Specifications:

FREQUENCY:

Frequency range: 0.03 Hz to 3 MHz, 10MHz for sine (Max. 6Vpp using 50-ohm termination)

Range selection: 8 ranges using touch panel Keyboard 7 x 3 matrix, 24 LEDS, fine control using 10T Pot.

Resolution: 0.1% of range using Fine key

Wave forms: Sine, Square, Triangle, TTL/CMOS, Ramp, Pulse O/P using duty cycle control, PWM O/P.

DISPLAY WITH FREQ. /AMP. SELECTION

Frequency Display: 16x2 LCD display

Amplitude display: Display in Vpp with accuracy +3

SINE OUTPUT

Trueness: +0.35V (10V reference):

SQUARE OUTPUT:

Symmetry: Symmetry: < +3% (at 1KHz),

Rise time: Less than 50ns@1MHz:

TRIANGLE OUTPUT

Linearity: 99% @ 100KHz

RAMP/PULSE OUTPUT:

Duty cycle: 15% to 85% of cycle period.

TTL/CMOSOUTPUT:

Rise & Fall time: Less than < 20nsec:

Output level: H> = 4.13, L <=0.26 (TTL), 3V to 15V variable [CMOS

OUTPUT

Output voltage: 400mV to 20Vpp settable through Amplitude Control Knob. (Variable attenuation upto -35dB)

O/P Impedance: 50-ohm 0/P

Offset with enable: 10VDC (variable) with enable can be used as DC output if amplitude set to minimum.

ATTEUNATOR:

Attenuation: -20dB/-40dB/-75dB Selection with attenuator enable

FREQUENCY MODULATION:

Input voltage: +30 V (max.) through BNC provided with max. Freq. when -9V at BNC.

Freq. variable range: 1:100 when frequency pot is set to range centre frequency

SWEEP INTERNAL:

Frequency: Variable from 0.25Hz to 50Hz.

Waveform: Sawtooth (Linear)

Amplitude: 0 to 5Vpp

Sweep 0/P: made available on the rear BNC.

MOD. FREQ. (INTERNAL):

400Hz sine wave with amp: 6Vpp (default) 20Hz to 20KHz freq. gen. with sine.sq. trg. function selects

EXTERNAL SWEEP

Through Ext. Mod. Input.

AMPLITUDE MODULATION:

Input voltage: Internal: 4Vpp (AM bal.) External: 9Vpp Input at BNC.

Waveforms: Supports ASK, AM Standard, AM Balanced

FREQUENCY COUNTER:

Internal/External: Frequency counter Range: 10 MHz (Internal), 50 MHz (external) [100MHz] through ext. counter BNC provided & selection through keyboard. Sensitivity: 150m Vrms (upto 50 MHz) Accuracy: Time base +1 count. GENERAL:

Operating Temp: 0 to 50C (Accuracy specified at 25C).

Power: 220/230VAC SW 10%, 50 Hz, 15VA.

Accessories: Power cord, BNC to BNC, BNC to Crocodile cable & Operating manual

High Precision Signal Generation

This function/arbitrary waveform generator offers exceptional signal integrity and versatility. It provides fine frequency (1 Hz resolution) and amplitude (1 mVpp resolution) control, supporting up to 10 MHz output frequency and up to 20 Vpp amplitude. Its low harmonic distortion ensures clean waveforms, making it suitable for precise testing and measurement.


Multiple Waveform and Modulation Capabilities

Easily select from a wide range of standard waveforms or custom arbitrary signals, thanks to its 64 Kpts memory. The unit supports advanced modulation-including AM, FM, FSK, and PM-as well as sweep and burst modes. This flexibility streamlines complex testing setups for research, development, and educational demonstrations.


Robust Design and User-Friendly Interface

Constructed from a metallic body with a plastic front panel, the device is durable and reliable for professional environments. The digital color LCD and intuitive controls (buttons and rotary knob) facilitate effortless setup and operation. With built-in memory and USB/RS232 connectivity, data management and waveform generation are seamless.