Heat Transfer By Conduction For Engineering Lab / School Lab Model

About Heat Transfer By Conduction For Engineering Lab / School Lab Model

RANGE OF EXPERIMENTS TO BECARRIED OUT:

1.To observe radial & axial flow heat conduction

2.To determine Radial & Axial thermal conductivity of test speciman .

3. To observe and plot the temperature distribution along the length of the speciman.

4. The experiments can be conducted at various values of input & calculation can be made accordingly.

5. To plot Heat input Vs thermal conductivity.

EXPERIMENTAL SETUP:

1. Radial Flow Unit

a. Mild Steel & Aluminium test specimens

b. Common Heater & water-cooled heat sink Assembly.

c. Set of thermocouples.

2. Axial Flow Unit

a. Mild Steel & Aluminium test specimens

b. Common Heater & heat sink Assembly.

c. Set of thermocouples.

CONTROL PANEL:

1. 12 Channel Digital Temperature Indicator

2. Dimmerstat: 0 - 4 A.

3. Main's On/Off Switch.

4. Digital Voltmeter: 0 - 250 V.

5. Digital Ammeter: 0 - 5 A.

1.5 m.(L)x 1.0 m(W) table top.230vAc Supply 50Hz