ANTHROPOLOGY

PARALLELOGRAPH ANTHROPOLOGY

Made of Cast iron Base Chrome Plated Having two rod of stainless steel parallel mounted on bar

CRANIOPHOR MADE OF CAST IRON

SPECIFICATION :- It is made up of cast iron base P.C. On Cast Iron base two beam pipe which is moving one and other is fixed One craniophore clamp mounted on the stand to hold the skull.

HORIZONTAL NEEDLE

SPECIFICATION :- It is made up of cast iron round P.C. One rod made of Stainless Steel 8mm mounted on base. A brass slider round having on Stainless Steel rod vertically. In brass slides one stainless steel rod of 4mm is moving horizontal having pointed ends.

GONIOMETER ANTHROPOLOGY

SPECIFICATION : - Material : Brass Chrome Plated Corrosion resistance Crystal Clear Markings Max measurement angle- 180 Minimum scale - 1 Degree OD -90mm

Cubic Craniophor With Clamp

Material : Brass, Weight : Approx 2.5 kg Tape Measuring Accuracy- + - 0.1mm Uncertainty over a length of 1000 mm including additional 100 mm on either side of the scale - +- 0.03mm The Instrument should have an appropriate fully automatic A graduated linear Scale shall be then placed alongside the tape measure- Yes Each Graduation on the tape for every meter will be then calibrated using an appropriate standard - yes

DIAGRAPH CAST IRON BASE P.C.

SPECIFICATION :- It is made up of cast iron base P.C. A Scale of brass mounted on cast iron Base. Two aluminum slides moving on the scale One slider having "C" tube arc aluminum metal. One slider having brass holder to hold pencil.

ANTHROPOMETER ROD

SPECIFICATIONS : Made of Brass. Measuring Range inches 0 in- 82.68 inch Measuring Range-millimeters 0 mm to 2100mm Weight 2 lbs./0.95 kg Must have accessories, including a canvas carrying bag recurved Metal Branches, a baseplate and an auricular Height needle.

BASE PLATE FOR ANTHROPOMETRY

SPECIFICATION :- Dimension 200x200x7.5 mm Made of Brass. Approx wt. Made to Hold anthropomety rod set.

HEIGHT MEASURING STAND & STANDIOMETER

SPECIFICATION :- With movable head piece or measuring rod typically Heavy waterproof wooden board Eazy to carry with carrying belt Un- scretchable scale printing Long life Easy to installation and maintenence

OSTEOMETRIC BOARD

SPECIFICATION :- Material : Wooden/Steel The Measurement can be done up to a length of 2ft.

SKIN FOLD CALIPER

SPECIFICATION :- Made of Aluminum Casting with superior glossy paint. Built with Spring mechanism. A Gauge of 10mm is attached with this instrument to measure the skin

SLIDING CALIPER

SPECIFICATION : Material : Brass with chrome plated Measuring ramge (length)- millimeters 0 mm to 200mm Depth : 0.50mm With box

SPREADING CALIPER

SPECIFICATION :- Material : Brass Measuring range- inches 0 in - 11.81 in measuring range - millimeters 0 mm to 300mm Also available in range- millimeters 0 mm to 600 mm.

MANDIBULOMETER ATHROPOLOGY

SPECIFICATION :- Improved execution black type Material : Brass Weight 1.5kg Must have horizontal scales vertical scales rapporteur

Spreading caliper 300mm(6")